SYNTOR X PACKET MODIFICATIONS

 

  1. Connect the IDC Enable on J4 to the PL/DPL Enable on J103 with a diode as shown in the drawing above. Because the HLN5008A board is present, this would be easiest if the diode is soldered on the bottom of the Personality Module with insulation provided for the diodes leads.

[TOP] [X HOME] [BACK]

[HOME]

--

PL, Private Line, DPL, Digital Private Line, MPL, Talkaround, MDC-600, MDC-1200, MVS-20, Securenet, Smartnet, Privacy Plus, Trunked X2, Trunked X3, Touch Code, Quick Call II, Channel Scan, Talkback Scan, System 90, System 90*s, Systems 9000, Mitrek, Micor, Spectra, MataTrac, Syntor, Syntor X, Syntor X 9000 and Syntor X 9000E are trademarks of Motorola Inc.