SYNTOR X PACKET MODIFICATIONS

 

  1. Make sure jumpers JU2 and JU8 are removed.
  2. Connect the IDC Enable pad to the PL/DPL Enable pad with a diode as shown in the drawing above.
  3. Connect the PL/DPL Enable pad to the J1-21 pad.
  4. Connect the PL/DPL Reverse Burst pad to the J1-36 pad with a diode as shown in the drawing above.
  5. Connect the J1-36 pad to the Data Enable pad .
  6. Install the R31 Data Deviation Control replacement circuit and wire it as shown in the drawing above.

[TOP] [X HOME] [BACK]

[HOME]

--

PL, Private Line, DPL, Digital Private Line, MPL, Talkaround, MDC-600, MDC-1200, MVS-20, Securenet, Smartnet, Privacy Plus, Trunked X2, Trunked X3, Touch Code, Quick Call II, Channel Scan, Talkback Scan, System 90, System 90*s, Systems 9000, Mitrek, Micor, Spectra, MataTrac, Syntor, Syntor X, Syntor X 9000 and Syntor X 9000E are trademarks of Motorola Inc.